Asbestos removal from various surfaces is dangerous to the person doing the job in many ways. As such, one must first understand how the process is done and all necessary precautions that need to be taken, before, during, and after the task is finished. The information in this article is important to people intending to engage in the activity of removing asbestos-containing substances. Most jurisdictions only allow homeowners and qualified professionals to do this work. When in need of the best asbestos removal Edmonton offers one of the best destinations to consider visiting.
The first step in the removal process is locating the precise location of the material. Once the material has been located and confirmed to contain asbestos, the second step should be deciding whether or not it should be removed. This decision is important because if the material is left untouched or undisturbed, asbestos fiber cannot be released into the air. This leaves them harmless to people occupying the home.
The easiest way of combating this substance is normally to leave it alone. Contaminated surfaces like ceilings are sometimes located far from areas used by house occupants. As such, it is possible to occupy the room and even work in it without having much trouble. If the contamination is on the ceilings, a thin layer of paint can be sprayed on it to keep it intact. Although, this may cause problems in future when removal of the asbestos-containing material needs to be done.
The activity involves three major aspects, that is, worker protection, wetting, and finally containment. Thorough protection is needed for the worker before setting out to do the job. This is to avoid inhaling or getting contaminated with the resultant fibers. The protection gear used should include rubber boots, disposable coveralls, disposable gloves, and suitable respirators. User manual for the respirator must be read and understood well before using to ensure a tight seal.
The second precaution is wetting the work surface. The surface should be drenched heavily with clean water before, during, and after the removal process. This is necessary so as to keep the fibers resulting from the material out of air since its inhalation can cause major health problems. The removed material should also be kept saturated with water till it is suitably packaged and sealed ready for disposal.
Containment is necessary for avoiding possible spreading of fiber to other areas. This is normally done using a plastic containment. The containment is constructed around walls, floors, and ceiling boards in the work area. If the containment is sealed tightly, it is able to capture all asbestos-containing material for safe disposal. Recommendations require a minimum of three people to do the job.
To achieve safe and successful results, the work needs use of various tools and supplies. Major supplies include tank sprayers, wallboard taping, knives, liquid dish washing detergents, disposable rags, encapsulants, polythene plastic sheeting, dust pans, step ladders, and duct tapes. Work areas that are located at a height are accessed using step ladders while sprayers are used to apply water n surfaces.
The work area and the room should be cleaned well after the job is done. All supplies used for cleaning should also be disposed together with the materials removed. Where necessary people living in the home should vacate during the process for a few hours.
The first step in the removal process is locating the precise location of the material. Once the material has been located and confirmed to contain asbestos, the second step should be deciding whether or not it should be removed. This decision is important because if the material is left untouched or undisturbed, asbestos fiber cannot be released into the air. This leaves them harmless to people occupying the home.
The easiest way of combating this substance is normally to leave it alone. Contaminated surfaces like ceilings are sometimes located far from areas used by house occupants. As such, it is possible to occupy the room and even work in it without having much trouble. If the contamination is on the ceilings, a thin layer of paint can be sprayed on it to keep it intact. Although, this may cause problems in future when removal of the asbestos-containing material needs to be done.
The activity involves three major aspects, that is, worker protection, wetting, and finally containment. Thorough protection is needed for the worker before setting out to do the job. This is to avoid inhaling or getting contaminated with the resultant fibers. The protection gear used should include rubber boots, disposable coveralls, disposable gloves, and suitable respirators. User manual for the respirator must be read and understood well before using to ensure a tight seal.
The second precaution is wetting the work surface. The surface should be drenched heavily with clean water before, during, and after the removal process. This is necessary so as to keep the fibers resulting from the material out of air since its inhalation can cause major health problems. The removed material should also be kept saturated with water till it is suitably packaged and sealed ready for disposal.
Containment is necessary for avoiding possible spreading of fiber to other areas. This is normally done using a plastic containment. The containment is constructed around walls, floors, and ceiling boards in the work area. If the containment is sealed tightly, it is able to capture all asbestos-containing material for safe disposal. Recommendations require a minimum of three people to do the job.
To achieve safe and successful results, the work needs use of various tools and supplies. Major supplies include tank sprayers, wallboard taping, knives, liquid dish washing detergents, disposable rags, encapsulants, polythene plastic sheeting, dust pans, step ladders, and duct tapes. Work areas that are located at a height are accessed using step ladders while sprayers are used to apply water n surfaces.
The work area and the room should be cleaned well after the job is done. All supplies used for cleaning should also be disposed together with the materials removed. Where necessary people living in the home should vacate during the process for a few hours.
About the Author:
You can get valuable tips on how to choose an asbestos removal Edmonton company and more information about a reliable company at http://balcorremediation.com now.
No comments:
Post a Comment