Monday, December 30, 2013

Important Pointers To Remember About Hardwood Flooring Refinishing

By Marcia Marks


Original hardwood floors can make any house elegant. Not surprisingly, homeowners would want to preserve such a beautiful feature. Luckily, hardwood flooring refinishing denver is now easier than ever. Step-by-step instructions are now available, providing directions from sanding the floors to refinishing and sealing. Nonetheless, you have to be extra careful if you decide to embark on this project on your own.

Do the preparatory works. Before starting out, it is advisable to complete all preliminary works to save time. Set aside the carpets and rugs, completely empty the rooms and remove the furniture. Sweep the floor clean then vacuum the dust. Even the cracks and fissures must be cleaned exhaustively. Pull out the protruding nails then replace them. Any carpet tack and strips must be removed, too.

Assess the area. Some portion of the floor may have been damaged over the course of its use. At first, it may not be evident because a piece of furniture was covering it. The moment the area becomes bare, you may start noticing the damages. Fix anything that requires mending before refinishing. Aside from its appearance, the floor's stability is an important factor to consider.

Get all your equipment ready. There are tools you will be using throughout the process. This includes a clean dust mop, a bucket, floor machine, stripping pads, stripper chemical and fine-haired paintbrush among others. To ensure that the work is continuous once you started working, you have to make sure that you have all the equipment you will be needing.

Sand the floors. After cleaning the area of dust and other debris, you need to smoothen the surface by means of a sander. Be sure to secure a sufficient amount of sandpaper. The results are not as good when you run out of sandpaper. The surfaces may get uneven. You may contact the local home improvement store for a floor sander. You may rent it for a reasonable price.

Polish the surfaces. The purpose for sanding is to polish the surface. It is advisable to start with a heavy-grit sandpaper to the entire floor. Vacuum up the dust then evaluate the results. Repeat the process with a much lighter grit until all the scratches have been removed. Depending on the floor's condition, this process may take a longer time.

Decide whether to stain or not. Some homeowners would prefer to keep the natural appearance of the wood. For those who want to give their floors a different look, staining must be done before finishing. If you do, make sure that the stains are evenly applied. Similar to sanding, follow the grain of the wood. Try to blend the stains, too. It looks neater than overlapped colors.

Pay keen attention to details. Most of the time, the minute details make all the difference. Decide what type of finish you want to use. Some of the most common choices include varnish and polyurethane. The water-based urethane produces clearer results once dried. On the other hand, oil-based polyurethane creates a light yellow hue.

As a final reminder, a DIY hardwood flooring refinishing denver must only be performed when you are confident of your ability. Attempting to do something beyond your capacity may not end up well. If the job gets too arduous and time-consuming, do not hesitate to contact a professional. An expert's service fee is a small price for a quality result.




About the Author:



No comments:

Post a Comment