Tuesday, June 27, 2017

To Learn About Dry Ice Blasting NYC Offers A Good Place To Visit

By Ann Burns


Sandblasting is a process used to clean object surfaces by removing burrs or preparing it for application of paint or any other coating. It is also used to add texture on to a surface. It involved the use of abrasives. Compressed air and water that is directed on to the surface of an object at high velocity. Various abrasives can be used in this process such as sand, coal slag among others. To learn about dry ice blasting NYC should be the place to go.

There are various factors that influence the type of material to be during this process. They include the cost of the abrasive material, which is determined by the budget one is working on. The design required by the client also determines job specifications. Another determinant is the environment in which the process is being conducted. If the blasting entails the use of toxic abrasives, it must be performed in a controlled environment.

The abrasives used are categorized in to two types. The toxic abrasives and the less toxic abrasives. The toxic abrasives include the silica sand, coal slag, nickel slag, copper slag among others. The less toxic abrasives include dry ice, sponge, baking soda and the like. In other cases, groundnut and walnut shells are used.

A dangerous environment is created to workers by this process. When the abrasives come into contact with the surface, a lot of nose is created. This noise is dangerous to human life since it has a lot of negative effect on the ears. It can also lead to hypertension. In some cases, it causes accidents due to the stress caused to workers.

In addition to noise pollution, there can also be air pollution. The abrasives evoke a lot of dust some of which contain toxic substances. These toxins are harmful to the workers when they are inhaled. For instance, if one inhales silica sand, they end up suffering from lung cancer. The other toxins like coal slag also damage lungs.

During the process of sandblasting several precautions need to be taken in to account. This is for the purpose of preservation of health and safety of workers. There are several conditions one has to follow before starting the procedure. First they need to learn about the hazards that can happen during the process. After learning about these hazards, they should take a point of eliminating them.

Such precautions include the use of less toxic abrasive materials. This ensures that the dust inhaled thus not contain toxins that can be harmful to the health. They can use wet abrasives instead of dry abrasives to reduce the level of dust generation. Abrasives are delivered inform of a slurry that is injected to the surface at high velocity. The results are usually the same.

As part of the precaution, taken the blasting process should be done in enclosed places away from public settlement so as to reduce noise pollution. In the case of non-enclosed blasting, it should be done in restricted areas away from people. Good should also be maintained in order to prevent slipping accidents.




About the Author:



No comments:

Post a Comment